Transform chairs with a paint-dipped effect

1. First, sand your chair with fine sandpaper. Use a damp cloth to remove any residue.

2. Apply one coat of Dulux Water-based Gloss Primer– this will ensure the paint has a nice surface to stick to. Follow the wood grain with your paintbrush and be careful not to let the primer drip down the legs.

3. Once the primer is dry, use your chosen colour to paint the whole chair. If you’d like to create a contemporary look, we recommend gloss paint such as Dulux Water-based Gloss– this will give you a beautiful luxurious gloss and smooth finish.

4. Once your first coat has dried, repeat step 1. After you've sanded the chair again, use a damp cloth to wipe the chair of any remaining dust. Apply a second coat of paint.

5. Once your second coat has dried, it’s time to go dipping! Measure how high up the leg you want the dipped effect to go and stick low-tack decorator’s masking tape just above this point. Repeat this for each of the legs.

6. Use your chosen second colour to paint the legs of your chairs. Make sure you paint the second colour over the masking tape line slightly – this will create a crisp line under the tape.

7. To stop the paint peeling off together with the tape, remove the masking tape before the final coat has finished drying. Make sure the paint isn't wet enough to drip before peeling back the tape to reveal a clean line.

You could try experimenting with this effect at different heights and with colours that work with your accessories. We’ve used neutrals here, but you can go for any colour combination that you like.